Yes, some products allow this function and some do not.
By default every PIXIE device has a white LED before it is added into your PIXIE home during the setup stage.
Once securely added to your home the indicator LED will now be blue.
PIXIE Master Device Smart Mech – G3 #
It is possible to turn off the LED indicator when the lights are off, via the App if you wish for PIXIE master devices.
You can choose between Amber and Blue.
This is done via the PIXIE Apps by navigating to each individual item
⇒ 3 little dots ( top right hand corner) –> EDIT
Make your changes and save.
#
PIXIE Secondary Device Smart Mech – G3 #
Its is also possible on some of the multifunction, multipurpose buttons to change the LED indicator to orange.
This applies to the PIXIE Multifunction controller SMF/BTAS and the Remote Control Mech SMFR/BTAS
As these are secondary devices and do not appear in the app, toggling the colour of the LED indicator is achieved by pressing the button on the device 5 times in bout 2- seconds.
You can choose between Amber and Blue.
Each time you press it 5 times it will select the opposite colour.
You can also disable the LED indicator on these devices by pressing the button 7 times quickly on the SMFBTAS
Syncing LED Indicator Colours Between Devices #
In some 2-way and 3-way control scenarios users have requested the ability to use the same colour and intensity for the LED indicator for all devices controlling that circuit.
At this time this is not possible with PIXIE as secondary devices such as the SMF/BTAS DO NOT track the current state of the load under control and therefore tracking the state of that load – and subsequently tracking the LED indicator status, is not possible as of February 2024.
