PIXIE Smart Switch G3 SWL600BTAM
Points received from claim: 275 points
Points Needed to Claim: 2000 points
PC206DR/R/BTAM IS THE RECOMMENDED PIXIE DEVICE TO SWITCH CONSTANT VOLTAGE LED DRIVERS AND IRON CORE DRIVERS TYPICALLY USED FOR POWERING GARDEN LIGHTS AND LED STRIP TRANSFORMERS.
If you choose instead to use the PIXIE SWL600BTAM G3 Smart Switch to control Constant Voltage LED driver and /or iron core drivers take note:
Loads with poor electrical performance will apply additional destructive impact to the switch, beyond its rated capabilities, irrespective of power consumption. This can result on both a shortened lifespan and irreversible damage to this device. The SWL600BTAM & STS600BTAM device is not compatible with devices below this minimum specification:
- POWERFACTOR: < 0.7
- INRUSH: < 24A
The PIXIE smart switch SWL600BTAM is a bluetooth enabled device suitable for switching up to 600Watts loads as part of the SAL PIXIE smart home ecosystem.
The new G3 small form factor means building multi gang switch plates with PIXIE is easier than ever before.
We DO NOT RECOMMEND these devices for GARDEN LIGHTING when using IRON CORE TRANSFORMERS or CONSTANT VOLTAGE LED DRIVERS with a maximum rating greater than 100W. Instead use the PIXIE Dual Relay Controller (PC206DR/R/BTAM)
These 2 articles may also help:
Can PIXIE control garden lights?
My PIXIE switch turn on and then off again right away. Why?
The SAL PIXIE 600W smart Switch has the complete SAL PIXIE features set and is controllable via Bluetooth from the SAL PIXIE and PIXIE PLUS Apps. This is ideal for larger loads and building multigang switch plates where applications require more than 3 master mechs. on board.
- Backwards compatible with all G1 and G2 products
- Tails not terminals, making it easier to fit into tighter spaces
- New form factor makes building multi-gang plates easier than ever with SAL PIXIE
- New G3 (Gen 3) switch tech for further improved performance
- 600W increased switching load in a smaller form factor!