SAL PIXIE Dual Relay Controller PC206DR-R-BTAM

[Join] or [Login] to view Pixie Points values, submit a claim or claim your rewards.

Click here to discover how this device extends PIXIE's smart home capabilities.

Donwload SAL Pixie Smart LED Strip controllers

PC206DR/R/BTAM IS THE RECOMMENDED PIXIE DEVICE TO SWITCH CONSTANT VOLTAGE LED DRIVERS AND IRON CORE DRIVERS TYPICALLY USED FOR POWERING GARDEN LIGHTS AND LED STRIP TRANSFORMERS.

If you choose instead to use the PIXIE SWL600BTAM G3 Smart Switch to control Constant Voltage LED driver and /or iron core drivers take note:

Loads with poor electrical performance will apply additional destructive impact to the switch, beyond its rated capabilities, irrespective of power consumption. This can result on both a shortened lifespan and irreversible damage to this device. The SWL600BTAM & STS600BTAM device is not compatible with devices below this minimum specification:

  • POWERFACTOR: < 0.7
  • INRUSH: < 24A

SAL PIXIE Dual Relay Controller PC206DR/R/BTAM provides 2 x 6Amp relays for large load switching such as inline with outdoor GPO’s or for 3 Wire Sensor configurations needing Automatic/ Manual /Disabled modes.

This is the RECOMMENDED PRODUCT for controlling GARDEN LIGHTING with IRON CORE TRANSFORMERS OR CONSTANT VOLTAGE LED DRIVERS

There is NO MINIMUM LOAD REQUIREMENT for the 2 relays to operate.

The PIXIE Dual Relay Controller is part of PIXIE smart home system made for Australian homes, with Bluetooth mesh built-in and controllable from the free PIXIE Apps.

Each 6Amp relay can be independently controlled and included in groups as scene like all PIXIE products.

This article explains why this is the best product for garden lighting with IRON CORE transformer:

Can PIXIE control garden lights?

 

  • 2 Independently controllable 6A , normally open relays
  • Full scheduling, grouping, scene control capabilities

Setup features

  • Memory feature to enable restore to previous state in the even of a black out.
  • Bluetooth Mesh Booster included in device
  • Push Button terminals allow standard bell press-mechs to drive attached blinds directly