PIXIE SDD400RSBTAM RippleShield Dimmer

The PIXIE RippleShield dimmer – SDD400RSBTAM must be used when controlling RippleShield enabled lights such as Coolum Plus (S9068TW35WH/RS), Ecogem_SFI and UNIFIT SFI modules.

This delivers flicker free dimming to 1% output in areas in NSW and Queensland which are impacted by off-peak hot water flickering and solar installations where downlight flickering is problematic.

Note it can ONLY be used to control SAL RippleShield enabled lighting devices. Use the PIXIE SDD300BTAM for all other trailing edge phase dimmed applications.

This device replaces the SDD400SFI dimmer which is now obsolete.

Note: this device should be treated as a 150W dimmer. This is related to the relay used in the and associated startup inrush from RippleShield enabled devices.

When used with Coolum Plus (S9068TW35WH/RS) which is colour tunbale (3000k to 6500k) with Human Centric Lighting, colour can be tuned via app and via push button directly.

• Press the dimmer 3 times quickly to enter colour change mode
• Press and hold to alter colour temp, release when happy
• wait 10 seconds OR press 3 times to confirm new colour

• Compact form factor allows for up to 6 Gang dimming wall plates
• Digital push button control, with three (3) complimentary key caps provided to suit most switch plates
• Smooth dimming performance to 1.0% of light output
• PIXIE connectivity is achieved via the PIXIE / PIXIE PLUS app or paired secondary device
• Fits most branded switch plates and PIXIE Ambience plates
• Over temperature, overload, short circuit protection
• No more than 10 RippleShield downlights can be connected.
• Backwards compatible with all PIXIE G1 and G2 PIXIE devices