---
title: How does PIXIE work with BigAss Fans?
description: "PIXIE works with Big Ass Fans through a combination of the BigAss fan 0-10v module (model#: 006352) and the PIXIE 0-10v Controllers. This operates with both SAL PIXIE and PIXIE PLUS apps. *🌟* **Simple, Smart control**As the PIXIE PC152V-R-BTAM is…"
url: "https://pixiepartners.com.au/support-docs/how-does-pixie-work-with-bigass-fans/"
updated: "2025-09-08"
category: Integration / Ceiling Fans
tags:
  - big ass
  - bigass
---

# How does PIXIE work with BigAss Fans?

PIXIE works with Big Ass Fans through a combination of the BigAss fan 0-10v module (model#: 006352) and the PIXIE 0-10v Controllers.

This operates with both SAL PIXIE and PIXIE PLUS apps.

*🌟*

**Simple, Smart control**As the PIXIE PC152V-R-BTAM is a PIXIE Master device this allows users to access all of the group, scenes, schedules and associated voice control scenarios when using voice control capabilities too.

 

# What's Needed to Make this Work?

For each Big Ass fan you will need:

 

- - 1 x Haiku L 0–10 V driver - Model# 006352
- - 1 or 2 PIXIE PC152V-R-BTAM - 0-10v Controller

 

The Haiku L 0–10 V driver offers the convenience of integrating Haiku L fans with a PIXIE 0-10v dimmer using an industry standard protocol.

The little driver is tucked away neatly in the escutcheon, the 0–10 V driver provides independent control of fan speeds and light intensity while supporting daisy-chaining for one or up to 10 fans.

The **Haiku L 0–10 V driver** driver offers ultimate flexibility of control for Haiku L by providing a voltage between 0 and 10 VDC to produce varying fan speeds and lighting levels using the voltage “source” standard — 10 V as 100% on and 0 V as off.

 

![](https://pixiepartners.com.au/wp-content/uploads/2025/08/big-ass-fan-how-to-install-PIXIE-1024x536.png)

 

## How to set it up?

There are 2 simple steps.

First install the driver into the Big Ass fan base.

- - Make sure SINKING dip switches are set
- - Make sure 0-10v cabling is connected to the correct input needed

 

*⚠️*

**One or 2 PIXIE Controllers Needed?**The Big Ass module allows connection of discreet fan control and light control 0-10v modules. This means if you have a Big Ass fan with both a light and fan and you would like to control both you will need one (1) Big ass Fan module and two (2) PIXIE 0-10v controllers.

 

In the PIXIE or PIXIE PLUS App, scan for the PIXIE modules, make sure when adding the 01-0v controller wired to fan control input that you identify this as a fan controller. This will ensure you are provided both the correct interface in the App for fan control and precise mapping of the 0-10v controllers signal out to the Big Ass fan driver.

If you have another module for light control this can just be added as a standard 0-10v master dimmer controller - normal operation.

 

### What do you get?

- - Intuitive fan control interface in the PIXIE Apps
- - Access to all PIXIE groups, scenes, schedules and control aspects.
- - Ability to mount up to 8 PIXIE Multifunction Rotary controllers on the wall to control directly.
- - Independent fan control: speed up/down and on/off
- - Independent light control: intensity up/down and on/off
- - No programing involved

###

 

### What is Sink versus Source Mode?

Always set the dipswitches to SINK mode, never source mode.

 

*❗*

**Don't Use Source Mode**If you set the dipswitches to source mode AND for some reason the PIXIE controllers are powered off ( and the fan is not) or the PIXIE controller fails, the fan will spin by itself with no way to turn it off.

 

---